ABRASIVESTOCKS | KITS & BUNDLES
Local floor preparation, from grinding to finer refinement
Plan smaller concrete floor repairs and edge work with a 125mm diamond cup wheel and four wet-use resin diamond grades. The cup wheel addresses suitable raised or rough concrete; the resin discs provide separate options for refining the surface where the next finish requires it.
A$119.00 ex GST | A$130.90 inc GST
What is included?
This is one fixed configuration. The quantities below define exactly what is supplied.
| Item / grade | Supplied quantity | Pieces in each pack |
|---|---|---|
| 125mm diamond concrete grinding cup wheel, 22mm bore | 1 | 1 |
| 125mm wet-use diamond resin disc #50 | 1 | 1 |
| 125mm wet-use diamond resin disc #100 | 1 | 1 |
| 125mm wet-use diamond resin disc #200 | 1 | 1 |
| 125mm wet-use diamond resin disc #400 | 1 | 1 |
Plan the work
- Identify the substrate and any existing coatings or hazardous residues before disturbing the floor. Test the proposed preparation method on a small area.
- Use the cup wheel only on a compatible guarded concrete grinder with the required dust controls. It is not automatically a wet-rated wheel.
- Use the wet resin discs on separately compatible wet-rated equipment where refinement is appropriate. Clean up slurry with suitable equipment. Follow the next coating supplier’s required surface profile; finer is not always better.
Machine and fit check
Cup wheel: 125mm diameter, 22mm bore. Resin discs: 125mm, wet-use type. Verify their actual attachment interface, backing system and speed ratings separately. Grinder, wet polisher, backing pads, shroud and extraction equipment are not included.
Application boundaries
For local bare-concrete preparation and refinement, not a complete whole-floor restoration system. No coverage area, coating removal capability, slip rating or polished-concrete result is guaranteed. No cleaner, sealer, crack repair or coating is supplied.
Dust and slurry control: Grinding concrete or stone can release respirable crystalline silica. Use an assessed, effective control method and suitable protective equipment. Do not carry out uncontrolled dry processing. Wet discs require wet-rated equipment; contain slurry and prevent it drying into airborne dust. Follow local work health and safety requirements.
Replace the parts you use most
125mm diamond concrete grinding cup wheel, 22mm bore • 125mm wet-use diamond resin disc #50
Gallery photographs show representative component products, not a photograph of a packed complete kit. Use the contents table for exact grades and quantities. Machines and workshop equipment shown in component photographs are not included.
Component prices and bundle value
All prices are AUD. The table uses current listed component unit or pack rates checked on 7 November 2026; each pricing unit is stated explicitly.
| Component | Pricing unit | Unit / pack price ex GST | Quantity | Line value ex GST |
|---|---|---|---|---|
| 125mm diamond concrete grinding cup wheel, 22mm bore | Each | A$65.00 | 1 | A$65.00 |
| 125mm wet-use diamond resin disc #50 | Each | A$18.00 | 1 | A$18.00 |
| 125mm wet-use diamond resin disc #100 | Each | A$18.00 | 1 | A$18.00 |
| 125mm wet-use diamond resin disc #200 | Each | A$18.00 | 1 | A$18.00 |
| 125mm wet-use diamond resin disc #400 | Each | A$18.00 | 1 | A$18.00 |
| Price comparison | Ex GST | Inc GST |
|---|---|---|
| Same components at listed prices | A$137.00 | A$150.70 |
| KIT / BUNDLE PRICE | A$119.00 | A$130.90 |
| Saving against listed component value | A$18.00 (13.14%) | A$19.80 |
Comparison excludes freight and additional checkout discounts. GST-inclusive totals are rounded to the nearest cent. No labour, equipment hire or coverage allowance is included in the bundle price.
Need to confirm your machine or substrate? Contact Abrasivestocks with the model, dimensions and intended finish before ordering.
