ABRASIVESTOCKS | KITS & BUNDLES
A seven-grade wet diamond selection for professional stone work
Select seven wet-use resin diamond grades for controlled scratch refinement on suitable stone benchtops. The defined 125mm selection gives a stone professional several starting and finishing options; the correct sequence must be established from the actual slab, damage and target surface.
A$109.00 ex GST | A$119.90 inc GST
What is included?
This is one fixed configuration. The quantities below define exactly what is supplied.
| Item / grade | Supplied quantity | Pieces in each pack |
|---|---|---|
| 125mm wet-use diamond resin disc #50 | 1 | 1 |
| 125mm wet-use diamond resin disc #100 | 1 | 1 |
| 125mm wet-use diamond resin disc #200 | 1 | 1 |
| 125mm wet-use diamond resin disc #400 | 1 | 1 |
| 125mm wet-use diamond resin disc #800 | 1 | 1 |
| 125mm wet-use diamond resin disc #1500 | 1 | 1 |
| 125mm wet-use diamond resin disc #3000 | 1 | 1 |
Plan the work
- Identify whether the benchtop is natural marble, natural quartz-bearing stone or a resin-bound engineered product. Confirm that the planned work is permitted and suitable for that exact surface.
- Test on an offcut or hidden area. Start at the least aggressive appropriate grade and inspect the scratch pattern before changing discs.
- Use only compatible wet-rated equipment and control slurry. Colour, sheen and texture must be assessed against the surrounding surface; resin discs alone may not reproduce a factory finish.
Machine and fit check
All seven discs are 125mm wet-use resin diamond discs. Confirm the actual attachment interface, backing pad and permitted operating speed before use. Wet polisher, backing pad, stone-specific polishing powders and sealers are not included.
Application boundaries
Not a general DIY engineered-quartz restoration kit. In Australia, processing new engineered-stone benchtops is prohibited. Work on installed legacy engineered stone is limited to legally permitted activities with applicable notifications and controls. For engineered quartz, confirm the exact material, legal status and manufacturer-approved method before ordering or use. Marble etching, resin damage and deep stains may need other treatments; no factory-finish restoration is promised.
Dust and slurry control: Grinding concrete or stone can release respirable crystalline silica. Use an assessed, effective control method and suitable protective equipment. Do not carry out uncontrolled dry processing. Wet discs require wet-rated equipment; contain slurry and prevent it drying into airborne dust. Follow local work health and safety requirements.
For Australian engineered-stone requirements, consult Safe Work Australia and your state or territory regulator before planning any processing work.
Replace the parts you use most
125mm wet-use diamond resin disc #50
Gallery photographs show representative component products, not a photograph of a packed complete kit. Use the contents table for exact grades and quantities. Machines and workshop equipment shown in component photographs are not included.
Component prices and bundle value
All prices are AUD. The table uses current listed component unit or pack rates checked on 7 November 2026; each pricing unit is stated explicitly.
| Component | Pricing unit | Unit / pack price ex GST | Quantity | Line value ex GST |
|---|---|---|---|---|
| 125mm wet-use diamond resin disc #50 | Each | A$18.00 | 1 | A$18.00 |
| 125mm wet-use diamond resin disc #100 | Each | A$18.00 | 1 | A$18.00 |
| 125mm wet-use diamond resin disc #200 | Each | A$18.00 | 1 | A$18.00 |
| 125mm wet-use diamond resin disc #400 | Each | A$18.00 | 1 | A$18.00 |
| 125mm wet-use diamond resin disc #800 | Each | A$18.00 | 1 | A$18.00 |
| 125mm wet-use diamond resin disc #1500 | Each | A$18.00 | 1 | A$18.00 |
| 125mm wet-use diamond resin disc #3000 | Each | A$18.00 | 1 | A$18.00 |
| Price comparison | Ex GST | Inc GST |
|---|---|---|
| Same components at listed prices | A$126.00 | A$138.60 |
| KIT / BUNDLE PRICE | A$109.00 | A$119.90 |
| Saving against listed component value | A$17.00 (13.49%) | A$18.70 |
Comparison excludes freight and additional checkout discounts. GST-inclusive totals are rounded to the nearest cent. No labour, equipment hire or coverage allowance is included in the bundle price.
Need to confirm your machine or substrate? Contact Abrasivestocks with the model, dimensions and intended finish before ordering.
