ABRASIVESTOCKS | KITS & BUNDLES
Five useful grades, one defined selection
Prepare timber and furniture surfaces with fifty 150mm film hook-and-loop discs, divided into five clearly labelled grades. A manageable mixed selection makes it easier to replace the grade you actually need while keeping the next sanding stage close at hand.
A$39.00 ex GST | A$42.90 inc GST
What is included?
This is one fixed configuration. The quantities below define exactly what is supplied.
| Item / grade | Supplied quantity | Pieces in each pack |
|---|---|---|
| 150mm film hook & loop discs #80 — 10-pack | 1 | 10 |
| 150mm film hook & loop discs #120 — 10-pack | 1 | 10 |
| 150mm film hook & loop discs #180 — 10-pack | 1 | 10 |
| 150mm film hook & loop discs #240 — 10-pack | 1 | 10 |
| 150mm film hook & loop discs #320 — 10-pack | 1 | 10 |
Plan the work
- Check the existing coating and test an inconspicuous area before sanding. Start with the least aggressive grade that does the work.
- Remove the previous scratch pattern before moving finer; vacuum or clean the surface between stages.
- Finish at the grade specified by your coating supplier rather than automatically using the finest disc.
Machine and fit check
For compatible 150mm hook-and-loop sanding pads. Match the actual disc hole pattern to the machine and its extraction system; diameter alone does not establish dust-extraction compatibility.
Application boundaries
Consumables only; sander, backing pad and dust extraction are not included. This is a 150mm selection, not a 125mm set. Confirm suitability before sanding veneers, painted or composite surfaces.
Inspect each consumable before fitting. Follow the machine and abrasive instructions, use appropriate guarding and protective equipment, and control dust. Test a small area before working across the full surface.
Replace the parts you use most
150mm film hook & loop discs #80
Gallery photographs show representative component products, not a photograph of a packed complete kit. Use the contents table for exact grades and quantities. Machines and workshop equipment shown in component photographs are not included.
Component prices and bundle value
All prices are AUD. The table uses current listed component unit or pack rates checked on 7 November 2026; each pricing unit is stated explicitly.
| Component | Pricing unit | Unit / pack price ex GST | Quantity | Line value ex GST |
|---|---|---|---|---|
| 150mm film hook & loop discs #80 — 10-pack | 10-piece pack | A$9.00 | 1 | A$9.00 |
| 150mm film hook & loop discs #120 — 10-pack | 10-piece pack | A$9.00 | 1 | A$9.00 |
| 150mm film hook & loop discs #180 — 10-pack | 10-piece pack | A$9.00 | 1 | A$9.00 |
| 150mm film hook & loop discs #240 — 10-pack | 10-piece pack | A$9.00 | 1 | A$9.00 |
| 150mm film hook & loop discs #320 — 10-pack | 10-piece pack | A$9.00 | 1 | A$9.00 |
| Price comparison | Ex GST | Inc GST |
|---|---|---|
| Same components at listed prices | A$45.00 | A$49.50 |
| KIT / BUNDLE PRICE | A$39.00 | A$42.90 |
| Saving against listed component value | A$6.00 (13.33%) | A$6.60 |
Comparison excludes freight and additional checkout discounts. GST-inclusive totals are rounded to the nearest cent. No labour, equipment hire or coverage allowance is included in the bundle price.
Need to confirm your machine or substrate? Contact Abrasivestocks with the model, dimensions and intended finish before ordering.
