ABRASIVESTOCKS | KITS & BUNDLES
Work into curves, corners and small details
Bring shaped hand-sanding supports and separate non-woven hand pads into one workshop selection. The profile block set supports abrasive sheets around curves and edges, while the three hand-pad grades give you additional choices for suitable surface preparation.
A$149.00 ex GST | A$163.90 inc GST
What is included?
This is one fixed configuration. The quantities below define exactly what is supplied.
| Item / grade | Supplied quantity | Pieces in each pack |
|---|---|---|
| 16-piece foam hook & loop block set, including supplied 100 sanding strips | 1 | 1 |
| 152 x 229mm non-woven hand pad, Green Coarse | 10 | 1 |
| 152 x 229mm non-woven hand pad, Red Medium | 10 | 1 |
| 152 x 229mm non-woven hand pad, Purple Fine | 10 | 1 |
Plan the work
- Select a block profile that supports the contour instead of bridging over the shape. Fit a suitable hook-and-loop abrasive strip.
- Work carefully at veneer edges and corners, checking the surface frequently.
- Use the separate hand pads only where their texture suits the material and coating. Test first; hand pads can change surface sheen.
Machine and fit check
Manual-use kit with mixed-profile foam blocks and 152 x 229mm hand pads. Included sanding strips are the assortment supplied with the existing block set; fixed strip grit quantities are not specified.
Application boundaries
The 100 sanding strips are already included in the block set price and are not charged again. Hand pads are separate manual abrasives, not hook-and-loop replacement sheets. No powered sander is included.
Inspect each consumable before fitting. Follow the machine and abrasive instructions, use appropriate guarding and protective equipment, and control dust. Test a small area before working across the full surface.
Replace the parts you use most
16-piece foam hook & loop block set, including supplied 100 sanding strips • 152 x 229mm non-woven hand pad, Green Coarse
Gallery photographs show representative component products, not a photograph of a packed complete kit. Use the contents table for exact grades and quantities. Machines and workshop equipment shown in component photographs are not included.
Component prices and bundle value
All prices are AUD. The table uses current listed component unit or pack rates checked on 7 November 2026; each pricing unit is stated explicitly.
| Component | Pricing unit | Unit / pack price ex GST | Quantity | Line value ex GST |
|---|---|---|---|---|
| 16-piece foam hook & loop block set, including supplied 100 sanding strips | Each | A$126.99 | 1 | A$126.99 |
| 152 x 229mm non-woven hand pad, Green Coarse | Each | A$1.60 | 10 | A$16.00 |
| 152 x 229mm non-woven hand pad, Red Medium | Each | A$1.60 | 10 | A$16.00 |
| 152 x 229mm non-woven hand pad, Purple Fine | Each | A$1.60 | 10 | A$16.00 |
| Price comparison | Ex GST | Inc GST |
|---|---|---|
| Same components at listed prices | A$174.99 | A$192.49 |
| KIT / BUNDLE PRICE | A$149.00 | A$163.90 |
| Saving against listed component value | A$25.99 (14.85%) | A$28.59 |
Comparison excludes freight and additional checkout discounts. GST-inclusive totals are rounded to the nearest cent. No labour, equipment hire or coverage allowance is included in the bundle price.
Need to confirm your machine or substrate? Contact Abrasivestocks with the model, dimensions and intended finish before ordering.
