ABRASIVESTOCKS | KITS & BUNDLES
Three surface-conditioning choices
Build and refine a brushed metal texture with three non-woven drums in one compact kit. Choose the drum that suits the starting surface, then compare the test area with the surrounding grain before committing to the full panel.
A$79.00 ex GST | A$86.90 inc GST
What is included?
This is one fixed configuration. The quantities below define exactly what is supplied.
| Item / grade | Supplied quantity | Pieces in each pack |
|---|---|---|
| Non-woven drum 120 x 100 x 19mm #80 Red | 1 | 1 |
| Non-woven drum 120 x 100 x 19mm #180 Green | 1 | 1 |
| Non-woven drum 120 x 100 x 19mm #320 | 1 | 1 |
Plan the work
- Clean the surface and establish the direction of the existing grain. Test each chosen grade on a spare or hidden area.
- Keep travel direction, pressure and overlap consistent to limit visible changes in the brushed pattern.
- Inspect under the lighting in which the finished panel will be used before deciding whether another grade is needed.
Machine and fit check
120mm diameter x 100mm working width, with a 19mm cross-hole mounting arrangement. Requires a compatible drum finishing machine and suitable guarding; not a direct-fit kit for an ordinary angle grinder.
Application boundaries
Drums only; machine and compound are not included. Intended for surface conditioning and satin textures, not deep weld removal or a guaranteed match to an existing factory finish.
Inspect each consumable before fitting. Follow the machine and abrasive instructions, use appropriate guarding and protective equipment, and control dust. Test a small area before working across the full surface.
Replace the parts you use most
Non-woven drum 120 x 100 x 19mm #80 Red
Gallery photographs show representative component products, not a photograph of a packed complete kit. Use the contents table for exact grades and quantities. Machines and workshop equipment shown in component photographs are not included.
Component prices and bundle value
All prices are AUD. The table uses current listed component unit or pack rates checked on 7 November 2026; each pricing unit is stated explicitly. Some standalone components have minimum order quantities. Their values below are calculated at listed per-item rates for the kit quantities; the same quantities may not be available as a standalone checkout order.
| Component | Pricing unit | Unit / pack price ex GST | Quantity | Line value ex GST |
|---|---|---|---|---|
| Non-woven drum 120 x 100 x 19mm #80 Red | Each | A$29.99 | 1 | A$29.99 |
| Non-woven drum 120 x 100 x 19mm #180 Green | Each | A$29.99 | 1 | A$29.99 |
| Non-woven drum 120 x 100 x 19mm #320 | Each | A$29.99 | 1 | A$29.99 |
| Price comparison | Ex GST | Inc GST |
|---|---|---|
| Component reference value at listed unit rates | A$89.97 | A$98.97 |
| KIT / BUNDLE PRICE | A$79.00 | A$86.90 |
| Saving against listed component value | A$10.97 (12.19%) | A$12.07 |
Comparison excludes freight and additional checkout discounts. GST-inclusive totals are rounded to the nearest cent. No labour, equipment hire or coverage allowance is included in the bundle price.
Need to confirm your machine or substrate? Contact Abrasivestocks with the model, dimensions and intended finish before ordering.
